
Bitumen storage and processing equipment
Heated bitumen tanks, thermal oil heaters, drum decanters, emulsion plants and PMB plants, as single units or a complete binder section.
- Scope
- Storage, heating, melting, emulsion, PMB
- Source
- Turkish manufacturers
- To quote
- Grade, delivery format, throughput, climate
Indicative figures based on manufacturer data. Capacity and specification are confirmed in each offer.
Which bitumen equipment does an asphalt or road project need?
Before bitumen reaches a mixer or a sprayer, it has to be received, kept liquid at the right temperature, pumped and, in many projects, modified or emulsified. The equipment depends on how the binder arrives and what you make from it:
- Bulk bitumen by tanker: heated storage tanks with a thermal oil heater.
- Bitumen in drums: a drum decanter to melt it out, then a heated tank.
- Emulsion for tack coat, chip seal or cold mix: a bitumen emulsion plant.
- Modified binder for heavy traffic: a PMB plant.
We source each unit from Turkish manufacturers, either alone or matched to a new or existing asphalt plant. Send us your bitumen grade, delivery format, daily consumption and site climate, and we will compare suitable offers.

What we source
Heated bitumen storage tanks
Insulated vertical or horizontal tanks with heating coils and temperature control.
Thermal oil (hot oil) heaters
Heat a transfer oil that circulates through tank and line coils for even, safe heating.
Drum decanters
Melt bitumen delivered in steel drums back into a pumpable liquid.
Bitumen emulsion plants
Colloid mill plants that disperse bitumen in water with an emulsifier.
PMB plants
High-shear mill and maturation tanks for SBS and other polymer-modified bitumen.
Asphalt plant binder section
Tanks, pumps, heated lines and meters that feed the mixer.
Built for these buyers
Asphalt plant owners
Add storage, heating or modification capacity to an existing plant.
Bitumen importers and distributors
Receive, store and repack bulk or drummed bitumen.
Road contractors
Produce emulsion or PMB for their own projects.
Questions buyers ask
What temperature should bitumen be stored at?
It depends on the grade and storage time. European industry guidance (Eurobitume) gives, for example, about 120 °C for short-term storage of 50/70 bitumen and about 80 °C for storage longer than a month. Pumping and mixing temperatures are higher and are set by the binder supplier.
Do I need a drum decanter or a storage tank?
If bitumen arrives in drums you need a decanter to melt it out, followed by a tank. If it arrives in bulk tankers, a heated storage tank with a heater is enough.
Can you supply equipment for an existing asphalt plant?
Yes. Tell us the plant capacity, current tank volume and heating system, and we will source units that connect to it.
Related machinery

Heated Bitumen Storage Tank
Insulated vertical and horizontal bitumen tanks with thermal oil, electric or steam heating, for asphalt plants, terminals and distributors.
View details
Thermal Oil Heater for Bitumen
Hot oil heaters that circulate thermal fluid through tanks, pumps and pipelines to keep bitumen and fuel oil at working temperature.
View details
Bitumen Emulsion Plant
Colloid mill plants that produce cationic and anionic bitumen emulsions for tack coat, prime coat, chip seal, slurry and cold mix.
View detailsRead before you buy
Get offers for Bitumen Storage & Processing Equipment
- Tell us the product, capacity and project country.
- We clarify the technical scope with you.
- You receive offers from suitable manufacturers to compare.
- Prefer WhatsApp? +90 543 797 58 57
