Asphalt Plants
Batch, mobile and drum mix asphalt plants, cold mix and recycling plants, bitumen processing equipment and plant components from Turkish manufacturers.

Choose by what you will produce
Start from the material your project needs. The table shows the usual plant type and size range; we then compare offers for your exact specification.
| You will produce | Machine system | Size range | Why this configuration |
|---|---|---|---|
| Many asphalt mixes for a local market | Stationary batch plant | 60 to 400 t/h | Every batch is weighed, so recipes change quickly and specifications are met reliably. |
| Asphalt along a moving road project | Mobile batch plant | 40 to 200 t/h | Relocates with the works and keeps batch-plant mix control. |
| High volume of one base or binder mix | Drum mix plant | Common mobile sizes 140 to 160 t/h | Fewer components and lower cost per tonne on long runs. |
| Cement-treated base, stabilised soil, cold mix | Pugmill plant | 200 to 800 t/h | Cold continuous mixing with cement, lime, emulsion or foamed bitumen. |
| Emulsion for tack coat, chip seal, slurry | Bitumen emulsion plant | Sized to daily demand | Colloid mill disperses bitumen in water for cold application. |
| Modified binder for heavy traffic and heat | PMB plant | Sized to asphalt output | High-shear mill and maturation tanks for SBS modified bitumen. |
Asphalt plants
Hot mix, cold mix and recycling plants. Each page explains how the plant works and when to choose it.

Stationary Batch Asphalt Plant
Fixed batch-type hot mix asphalt plants from 60 to 400 t/h. Every batch is weighed, so recipes change quickly and mix quality…
View details
Mobile Asphalt Plant
Transportable batch-type asphalt plants from 40 to 200 t/h, built on chassis modules so production can follow the road project.
View details
Continuous Drum Mix Asphalt Plant
Continuous asphalt plants that dry and mix in one drum, for high, steady output of one or two mixes on road projects.
View details
Cold Mix & Soil Stabilization Plant (Pugmill)
Continuous twin-shaft pugmill plants from 200 to 800 t/h for cement-treated base, soil stabilisation, cold asphalt and cold recycling.
View details
RAP Asphalt Recycling Equipment
Equipment to process reclaimed asphalt pavement (RAP) and feed it into hot or cold mixes: crushing, screening, RAP bins and dosing.
View detailsBitumen storage and processing
Equipment to receive, heat, melt, emulsify and modify bitumen.

Bitumen Storage & Processing Equipment
Heated bitumen tanks, thermal oil heaters, drum decanters, emulsion plants and PMB plants, as single units or a complete binder section.
View details
Bitumen Emulsion Plant
Colloid mill plants that produce cationic and anionic bitumen emulsions for tack coat, prime coat, chip seal, slurry and cold mix.
View details
Polymer Modified Bitumen (PMB) Plant
Plants that blend SBS, SBR or EVA polymer into hot bitumen with a high-shear mill and maturation tanks, for heavy-traffic and hot-climate…
View details
Heated Bitumen Storage Tank
Insulated vertical and horizontal bitumen tanks with thermal oil, electric or steam heating, for asphalt plants, terminals and distributors.
View details
Thermal Oil Heater for Bitumen
Hot oil heaters that circulate thermal fluid through tanks, pumps and pipelines to keep bitumen and fuel oil at working temperature.
View details
Bitumen Drum Decanter
Heated chambers that melt bitumen out of steel drums into a pumpable liquid, for sites that buy bitumen in drums instead of…
View detailsPlant components and systems
Main units for new plants, upgrades and replacements on existing asphalt plants.

Asphalt Plant Rotary Dryer & Burner
Rotary drum dryers with burners that remove moisture from aggregate and heat it to mixing temperature, for new plants or as replacements.
View details
Twin-Shaft Asphalt Mixer
Twin-shaft paddle mixers that coat every aggregate particle with bitumen in each batch; the core of a batch asphalt plant.
View details
Asphalt Plant Vibrating Screen
Enclosed multi-deck hot screens that split dried aggregate into 4 to 6 size fractions above the hot bins of a batch plant.
View details
Hot Aggregate & Filler Bucket Elevators
Chain bucket elevators that lift hot aggregate to the screen and filler to its silo, built for heat, abrasion and continuous duty.
View details
Asphalt Plant Baghouse Filter
Fabric bag filters that capture dryer dust before exhaust leaves the stack and return the fines to the mix as filler.
View details
Hot Mix Asphalt Storage Silos
Insulated, heated silos that store finished asphalt so the plant runs steadily and trucks load fast.
View details
Asphalt Fibre & Additive Dosing System
Weighing and feeding systems that add cellulose or other fibre granules and dry additives to each batch, for SMA and reinforced mixes.
View details
Mobile Aggregate Dosing Hopper
Transportable hoppers with belt or screw feeders that store and dose sand, gravel or soil on site for asphalt, concrete and stabilisation…
View detailsHow to choose an asphalt plant
Start with four questions: how many tonnes per hour you need at your typical aggregate moisture, how many mix types you will produce, whether the plant will stay in one place or move with the project, and how bitumen will arrive on site (bulk tanker or drums). These answers decide between batch and drum mix, stationary and mobile, and the binder handling equipment you need.
Send the answers with your RFQ. We compare offers from Turkish manufacturers for the same scope, so you can judge capacity, components, delivery time and price side by side.
From project brief to installation
- 01
Share your project
Product, application, target capacity, country and timeline.
- 02
Technical scope clarified
We turn your requirements into a clear specification that manufacturers can quote on.
- 03
Offers compared
Quotations from suitable Turkish manufacturers, side by side.
- 04
Meet the maker
Video call or factory visit in Türkiye before you decide.
- 05
Contract & secure payment
Advance payment or letter of credit, set out in the contract.
- 06
Production to installation
We coordinate production, shipment and installation with the manufacturer.
Tell us what you need.
Whether you are planning a production line or need parts and materials for a running project, send us the basics and we will come back with the next steps.